Premium Shed: The Apex 5ft x 6ft

This is the smallest shed in the Premium Range. While it may be small, it’s still as tough and elegant as the rest of the sheds in the premium range.

 

See the shed for yourself

Premium Apex 5ft x 6ft Dimensions

This shed is:

• 144cm Wide
• 179cm Deep
• 193cm Tall (in the apex)
• 180cm Tall (in the eves)

Premium Shed Materials & Build

This shed is made with Powder Coated Steel throughout.

• 1mm Powder Coated Steel Tube Frame
• 0.4mm thick roof and wall panels
• 0.6mm coating sheet on flat door
• Measurements are taken outside, from the widest points.

The Premium Range fits between our Classic Range and our Heavy Duty Range in terms of steel thickness.

 

Assembly Details

This shed is easy to assemble for those with experience in working with flat-pack items. Instructions, Screws, nuts and fittings are all included, however, you will need the tools to erect this yourself (drill, screwdriver). The instructions are image-based, i.e. there is very little text. We would recommend that you read our guide to self-assembly and check out our instructions page to see what’s involved if you’re thinking of giving self-assembly a go yourself.

We would strongly advise that two people put this unit together as it may be awkward or unsafe to do it alone. The large sheet panels can be cumbersome and difficult to align alone. They can become very dangerous in high winds, so we also advise against assembly in windy, wet or otherwise unsafe conditions.

 

Assembly by our team

The team will assemble your shed for you provided that you have a suitable base. The assembly team do not apply the screw caps or remove the protective plastic film. These are optional and it is the customers’ choice to add/remove these if desired.

The assembly team do not assemble any other products other than the steel shed.
e.g. They do not assembly shelving units, canopies, carts or any other item purchased with the shed 

 

Premium Shed: Base Requirements

Whether you’re getting our team to build your shed for you, or if you’re self-assembling, you will need a solid, level base for the shed to be built upon. It cannot go onto grass/muck alone. Bases like concrete, paving slabs, tarmac or hardcore stone are acceptable. We would recommend that your base is at least a half-foot bigger on each side that the stated shed size.

In this instance, we would recommend a 7ft x 6ft base.

We would also strongly recommend that you put down a damp-proof membrane for your shed. In most instances, this would go under your base when it’s being prepared. If someone is laying a concrete base for you, make sure this is going down before they pour the concrete. In the worst-case scenario, where your base is already built and it wasn’t done, you can just place the damp-proof under the frame of the shed. =

This will greatly reduce the chances of condensation forming in your shed during Winter months.

 

Premium Shed Features

Here are some of the most impressive features from this shed

Powder Coated Frame

These sheds are so rugged that we have no issue giving them an eight-year rust perforation warranty.

Floor Frame

Comes with an internal floor frame!

Double Hinged Flat Door

The single doors open to 70cm / 2’3.5″. The door is a single skinned, double hinged, key-lockable door.

 

304 Stainless Steel Screws

For a clean, professional finish.

Built-in Tool Hooks

With 30 hooks build in and more ports around the shed, you won’t be stuck for a place to keep your tools

8-year Rust Perforation Warranty

These sheds have an 8-year rust perforation warranty. We coat the panels with zinc, which prevents the steel rusting. That’s not to say that you will not get surface rust – the small screws may (over the space of a decade or so – or sooner if you are by the coast) show signs of surface rust, however, these are easily replaced and can be found in any good hardware shop.

Our warranty does not cover rusting that is caused by damage to the shed panels. If you scratch or damage a panel, this can allow rust in. We advise treating any scratches or damages straight away. Contact us if you need details of how to treat a steel shed.

It is for this reason also that we do not advise on placing any steel shed under a tree.

 

1. Please read our ‘What to expect after purchasing your shed’ guide for all information relating to delivery / assembly. Page 1 is flat-packed delivery details, page 2 is supply and fit details. 
2. The Pictured Wooden Floor is not included with flat-packed sheds. Ply flooring only comes with the assembly option, which is not available in every county. 
3. You will need a solid, level base for this shed. It cannot be laid on grass alone. Please see our guide on how to choose should you need assistance.
4. All Steel sheds, including this one, are measured externally, from the widest points. Internal floor size will differ from external measurements.
5. In very rare instances, the shed may vary +/-10% in size. This is because of the way in which steel is cut. 
6. Please read our FAQ if you have any other questions in mind before purchasing. Or call us at 01 864 4247 or message us on Facebook.
7. If you are considering self-assembly, we recommend that you read our guide on self-assembly first.