This shed is:

• 312cm / 10ft 3″ Wide (External)
• 352cm / 11ft 5″ Deep (External)
• 234cm / 7ft 7″ Tall (in the Apex)
• 206cm / 6ft 7″ Tall (to the Eves)
• 128cm / 4ft 1″ double door opening
• 198cm / 6ft 5“ door height

Please note that measurements are at the widest point (i.e. gutter to gutter)

• This shed is made with Galvanised colour coated steel
• 0.6mm galvanised Steel Tube Frame
• 0.4mm thick galvanised roof and wall panels
• 1.0mm thick door frame & entrance bar with powder coating
• This shed has an 8 year rust perforation warranty

The Premium Range fits between our Classic Range and our Heavy Duty Range in terms of steel thickness.

The Big Blu Shed is not short on great features. These include:

• Apex Roof Design with two air vents
• Higher Door height of 2 meters
• Double hinged flat skin door
• Pre-assembled door including 3 piece tool holder & four piece S hooks for different tools
• Easy to open/close the doors with full Gas spring for safety
• Handle with key lock (5 keys included)
• Centre U wall bars included for strength
• Vented to prevent condensation build up
• Steel power coated tube frame in the middle on the shed for added strength
• Stainless steel hinges
• Metal floor foundation kit & 4 inner anchors included
• Colour ‘Pigeon Blue’ RAL 5014

This shed is easy to assemble for those with experience in working with flat-pack items. Instructions, screws, nuts and fittings are all included, however, you will need the tools to erect this yourself (drill, screwdriver).

We would strongly advise that two people put this unit together as it may be awkward or unsafe to do it alone. The large sheet panels can be cumbersome and difficult to align alone. They can become very dangerous in high winds, so we also advise against assembly in windy, wet or otherwise unsafe conditions.

The Sheds Direct Ireland can assemble this shed in most counties. Use the dropdown menus to see the price of assembly in your county.
The team will assemble your shed for you provided that you have a suitable base (see below). The assembly team do not apply the screw caps or remove the protective plastic film. These are optional and it is the customers’ choice to add/remove these if desired.

The assembly team do not assemble any other products other than the steel shed.
e.g. They do not assembly shelving units, canopies, carts or any other item purchased with the shed 

All our Steel Sheds require a solid level base. Concrete, Paving slabs and Tarmac are all suitable. See more about what your base should look like here. We advise that you lay a damp-proof membrane under your base to reduce the chance of condensation formation during the colder months.