The Inverter Heater 6026
€480.00
One of our most Powerful Heaters!Â
With a max output of 4,000w, your room will be heated in no time which can last up to 12 hrs.
Great Safety Features!
The Inverter 6026 also comes with a built in sensor, that monitors its performance & carbon monoxide levels, along with a child-lock feature and anti tip sensor.
ECO Function Settings!
With the ECO Mode on, the heater will reach the desired temperature and go no further. Meaning you will save fuel and prevent overheating.
Out of stock
The Inverter 6026 CE
The Inverter 6026 CE Heater is an amazing piece of engineering. It has a fantastic heat output, is economically sound to run and is a sister to our popular Inverter 3018 Heater.
It has a powerful heat output of up to 4000W making it ideal for heating small to medium sized areas. It has all the assets of thermostatic power modulation so as not to overheat your room. It can maintain your desired temperature and save you fuel!
This is a Paraffin heater. It is not an electric heater. It requires a mains outlet to operate, but this is only to control the digital display, thermostat and to power the fan which pushes out the heat.
It has some amazing safety features, which include an anti-topple sensor, a Co and C02 Detector.
With an output of 800W to 4000W this Paraffin Heater will typically run for an incredible .12hr hrs from a full(5L) tank. Meaning a full bottle of tozane will last 48hrs.
Benefits
- The Inverter 6026 Ce heater will run on either C1 grade paraffin or on low odour Tozane
- You cannot use Kerosene in this heater. See why here.
- Unlike other brands on the market, the burner does not contain parts that require periodic replacement
- It’s virtually odourless when the correct fuel is used (check out our Tozane, linked above).
- Self Cleaning
- Fuel Pump
- Power: from 800W to 4000W
- Heating capacity: 164 cubic meters
- Up to 12 hours heating from a single 5L tank of fuel
- 24-hour programming (Can be programmed to switch on at any set time)
- Digital temperature control
- ECO button (Prevents you burning any unnecessary fuel)
- Multi-parameter safety sensor system with automatic shutdown
- CE Approved
- Electronic Thermostat, electronic level meter with buzzer
- Simple & User Friendly
- Motion sensor (If knocked into, the heater will cut out)
- Child lock feature
- Dimensions: 310mm high x 430mm width x 450mm deep
- Please note this heater requires a mains electricity connection for using the digital display only
- The Device has a full four year warranty
Any Questions?
If you have any questions that you can’t find the answer to here, call us at 01 864 4247 or message us on Facebook during business hours.
Can I use Kerosene in this heater ?
No. You cannot. You can only use C1 Grade Paraffin like Tozane in this heater.
Using Kerosene or other ‘dirty’ fuels has two main problems
1. They are damaging to your health. You wouldn’t let your car exhaust into your sitting room to warm it up, would you?
2. They contain plastics which clog the filter and which will damage the machine. Your warranty is void if Kerosene has been used.
Is this an Electric Heater?
This is a Paraffin Oil heater. It is not an electric heater, so it is much more economical to run.
The machine requires a mains outlet to operate, but this is only to control the digital display, thermostat and to power the fan which pushes out the heat.
Does it Smell?
While there is a slight odour when the heater turns on and off, it is considerably less than it was in the past.
People who are very sensitive to odours/smells may notice more of a smell. In general, the vast majority of people do not notice an overwhelming odour from these heaters.
Remember, Tozane is a ROLF (that is a Reduced Odour Liquid Fuel), so providing you use the correct you should experience minimal odours.
Is this a child friendly machine?
This heater is considerably safer for use in a home with children than most heaters.
There is a carbon monoxide alarm built into this machine
It has an ECO mode which saves fuel, but also prevents overheating of a room
It has an anti tip/bang sensor. If it detects a knock, it turns off.
What is the E4 Message I'm seeing
E4 / E2 / E0 codes are displayed when contaminated fuel or poor combustion is detected. It’s caused by one of two things.
1:Poor maintenance. The maintenance on an Inverter 6026 is fairly simple. Make sure the heater is hoovered regularly (when you’re hoovering the room it’s in) and especially the circular port on the back.
2:Poor Fuel Quality: Using domestic home oil kerosene will cause issues. There might be high levels of water in it, or excessively high levels of plastic. These can cause combustion issues caused by clogs.
Similarly, using Tozane which has been poorly stored can cause issues too. If Tozane is exposed to temperature changes, condensation might build up in a container than has been opened.
So these error codes are something that can be avoided by following the instructions provided with the machine.
If you’ve come across the E4 or E0/E2 error codes, this is what you should do:
1: Remove the fuel filter from under the heater tank and wash it in Tozane, using something like an old toothbrush to gently brush it. Don’t use anything which may separate and further worsen the problem, e.g. a sponge, or tissue. Do not use water or any other products other than Tozane when washing.
2: Hoover the back of the heater. You may need to remove the air filter an clean this too. We would advise against cleaning this filter in the presence of the oil – take it away from the heater, to prevent any contamination of the oil.
3: Drain the old fuel entirely from the tank. Allow the tank to drain for several hours if needed.
4: Top up the tank with new, fresh Tozane. To avoid throwing out fuel in the future, it is recommended that you store any fuel into airtight containers, rather than allowing it to sit, unused in the fuel tank for long periods.
5: Ensure the room is well ventilated and that there is space around the heater on each side when you restart it. If you are using this heater in a place where there are strong perfumes or sprays containing CFCs, it may be affected by these and it may not work in this environment. Move elsewhere, if so and retest after a ten-minute interval between moving.
