Motorbike Stand in red with adjustable wheel height holder
A side view of the motorbike on the stand. There are straps holding the bike in place and the bike stand is suspender, i.e. it is not touching the ground
A KTM SMT 990 motorbike on the Sheds Direct Ireland motorbike stand.
A top down view of the stand, showing the wheel in the back port. There are black and red cable straps holding the wheel securely in position. There are deep traction grooves on the wheel.
A side view of the bike in the sheds direct ireland motorbike stand. The straps are in use in the side ports, allowing the bike to freestand without assistance
A close up of the motorbike stand in use. A motorbike wheel is raised and locked in place
Motorbike Stand in red with adjustable wheel height holder
A side view of the motorbike on the stand. There are straps holding the bike in place and the bike stand is suspender, i.e. it is not touching the ground
A KTM SMT 990 motorbike on the Sheds Direct Ireland motorbike stand.
A top down view of the stand, showing the wheel in the back port. There are black and red cable straps holding the wheel securely in position. There are deep traction grooves on the wheel.
A side view of the bike in the sheds direct ireland motorbike stand. The straps are in use in the side ports, allowing the bike to freestand without assistance
A close up of the motorbike stand in use. A motorbike wheel is raised and locked in place

The Mighty Motorbike Stand / Chock

€58.00

Secure

This Motorbike stand (Motorbike Chock) locks into place.

Transportable

This lightweight piece can be used in the back of vans or other vehicles that you’re transporting your bike in. Just be sure to fasten it.

Boltable

If you’re using this in a garage, the unit can be bolted to the ground, giving it a stronger structure again.

The Motorbike Stand is perfect for keeping your bike upright in a shed, garage or even in a trailer. Simply drive your front wheel over the tilting locking it in and it will move with your wheel. Once it’s over it can be locked into place. As it is, it acts as a chock – something to keep the bike in position, but which can tilt. However, this motorbike chock can be converted into a stand by bolting it to a surface and applying tie-down straps (not included). In fact, even without the bolts, the stand can keep the bike from tilting (but we’d always recommending bolting it down to really give the motorbike stand that extra bit of security).

It’s bright red, so you can’t miss it. It being highly visible means its easy to get your wheel into position on the first try.

It has multiple bolting ports allowing you to really fix this thing down. There are tie-ports on both front sides with a metal loop which will support all standard tie-down straps. The unit can be bolted to solid surfaces or weighed down when transporting it around. It’s strong but lightweight, so if you need to throw it into a van, that won’t be an issue.

Stand Dimensions

Length: 60cm / 23.5″
Width: 45cm / 17.5″
Max Height when not extended 26cm / 10″
Max Height when extended 33.5cm / 13″
Wheel Width Suitability 11cm – 16cm / 4″-6″
Wheel Port Length 29cm / 11″

Specification

  • Ports for bolting to surfaces
  • Tie-ports for securing with rope/tie-down straps etc.
  • Built for securing front wheels
  • Adjustable wheel-hear height

Note: All bikes must be secured using tie-down straps during transit. Tie-down straps are not included.

Looking for more vehicle accessories? You can see them here.
Do you have any questions? Don’t fret – call us at 018644247 or message us on Facebook!